KW Suspension Variant 1 inox Coilover Kit – BMW 1 series (all)

KW Suspension Variant 1 inox Coilover Kit – BMW 1 series (all)

£1,125.00

SKU: 10220039 Category: Brand:

Description

KW Suspension Logo

Part number:

10220039

Version:

Variant 1

Damping adjustment:

None

Lowering FA/RA:

30-55 mm/25-50 mm

Adjustment FA/RA:

Thread/Thread

Material:

Stainless steel

Approval:

Part certificate (§19.3)

Content of delivery:

Set FA coilover struts, RA springs with height adjustment + dampers

Axle Load FA/RA:

– 945 kg/- 1070 kg

Year:

10/2007-

Vehicle type:

BMW – 1er Coupe – 182 (E82) –

135i 225kW 2979ccm – 6Cyl. Petrol

KW Variant 1 inox-line 

Sporty handling combined with outstanding looks. With factory pre-configured damping.

The KW coilover kit Variant 1 inox-line is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure – not just the car’s life.

Continuous lowering

With the KW coilover Variant 1 you can achieve maximum lowering in the TÜV-tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

The benchmark for tuning fans

KW coilover Variant 1 inox-line satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don’t buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 inox-line , rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

Trust In Our Experience

We are the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on our KW coilovers Made in Germany . Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. Of course, we give as a German manufacturer a 2-year warranty on our more than 4600 applications suspension solutions, which exceed OEM quality. The warranty will increase up to 5 years when the kit has been installed at one of our KW specialist dealers.

– Optimally pre-adjusted
– Sporty and comfortable dampening technology
– Stainless steel technology inox-line
– Individually height adjustable
– TÜV-tested adjustment range
– Ready to install complete solution
– High quality components for a long durability
– Complete documentation for easy handling

Setup – Factory pre-configured damping setup

The KW coilover Variant 1 inox-line has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.

Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are Show & Shine events are interested in the KW Variant 1 inox-line .

Delivery usually takes 1-3 working days (depending on order) but please allow up to 10 working days for your order to arrive during busy periods.

 Next day delivery available (subject to stock)

 

FULL FITTING & SET UP WITH CORNER WEIGHTING AVAILABLE 

Image maybe for illustration purposes only 

 

If you are unsure if this will fit your vehicle or require a part not listed please contact us 

 

Full fitting available 

Full workshop facilities:

Fitting & setup of all listed products

In-house rolling road & tuning

Motorsport Preparation

MINI CHALLENGE UK TEAM

PLEASE CONTACT US IF YOU HAVE FOUND THIS PRODUCT CHEAPER

Additional information

Weight 40 kg
Make

BMW

Model

1 SERIES

Variant

E8X

Engine

116D, 118D, 120D, 123D, 130I, 135I

Part

COILOVERS, SUSPENSION

has been added to your cart:
Checkout