ESS Tuning M54B30 Twin Screw Stage 2 (TS2)

ESS Tuning M54B30 Twin Screw Stage 2 (TS2)

£6,996.00 Inc VAT


ESS Tuning M54B30 Twin Screw Stage 2 (TS2)

The ESS M54B30 TS2 series system is equipped with a Lysholm style Twin Screw supercharger which has several advantages over the centrifugal compressors used in earlier ESS M52TU/M54 systems. It creates a higher boost-pressure at lower engine rpm, thus significantly increasing bottom and mid range torque. Lag time during shifts and on-off throttling are reduced to a minimum and the throttle response is incredible. The twin screw principle is also highly energy efficient, which contributes to the extreme power and torque output of the ESS TS Series systems. The patented liquid intercooling system consists of 3X500mm Laminova cores integrated into a high strength cast aluminum ESS intake manifold system covering all 6 cylinders resulting in flow-matched air distribution and optimal cylinder balance along with ultra-efficient cooling capacity for up to 550HP. The liquid intercooler coolant is pumped via a high capacity marine-grade circulation pump through a high capacity front mount heat exchanger. The system also utilizes a throttle body type butterfly air bypass valve to reduce SC parasitic drag and increase fuel economy during cruising conditions. The entire ESS TS system consumes less than 2hp during cruising and it is very energy efficient.

The overall system efficiency, torque delivery, power production, cooling capacity, and room for higher power stages is considerably higher than that of any competitor. The Twin Screw supercharger is the only product on the market today to combine both a positive displacement design for maximum low-end torque and highly efficient top-end horsepower output. Also emission levels at high speed and boost are lower than with other turbo and supercharging systems.

The redesigned ESS MS43/45 engine control software is perfectly calibrated for the TS supercharged engine providing optimum ignition timing under all conditions, recalibrated EGas for quicker throttle response, recalibrated VANOS control and perfectly optimized fuel delivery supplied by 6 larger Bosch fuel injectors also included with the kit. The software also features a 6800RPM rev limit and removed top speed governor.

Power development is 100% smooth and the car behaves just like stock until you demand raw power. Then, the car completely transforms, providing brutal acceleration normally reserved for big displacement performance cars.

The system maintains all OBD-II functions and it is backed by a comprehensive 2 year, unlimited mileage warranty program. The system installs in 8-10 hours using normal hand tools and no irreversible modifications to the car is necessary.

System components:

Custom ESS Spec Lysholm style 1.6L Twin Screw supercharger unit
High strength, dual-layer cast aluminum alloy ESS intake manifold with integrated high capacity Laminova based liquid intercooling system
Uni-belt SC drive system with additional OEM quality idler pulleys
6 larger Bosch fuel injectors
Throttle body style butterfly bypass system for superior fuel economy during cruising and optimal throttle response under all conditions
Perfectly optimized, dyno tweaked MS43/MS45 ECU software
CNC hard anodized brackets and hardware
Cast aluminium SC intake system with crankcase fume reduction system designed for boost
High temperature, custom made silicone hoses with clamps
Detailed, step-by-step installation manual
Heavy-Duty drive belt
All required installation hardware included
2 year/unlimited mileage warranty

ESS TS Series superchargers gives you the best of both worlds with instant boost, true industry-leading torque AND throttle response, while the ultra high efficiency of the twin-screw gives you maximum top end power. The TS2 is fully upgradeable to TS3.

ESS TS Series superchargers with it’s Lysholm supercharger technology and CAD designed intake runners creates boost the instant the throttle is touched usually reaching full boost by ~2200 rpm – long before a centrifugal supercharger commonly even creates 1psi of boost, resulting in breathtaking low-mid range acceleration and it also removes the need to rev the engine high to get good acceleration.

On automatic cars the boost is reduced to 7PSI due to transmission restrictions.

Correction factor for drivetrain loss is 15% above RWHP as seen in dynograph (RWHP/0.85)

Part number: 115-12
Boost pressure: 8 PSI
Horsepower: 345 SAE/350 DIN Manual, 335 SAE/340 DIN Auto, (ZHP vehicles +10HP)
Torque: 317 lb-ft/430 Nm Manual, 302 lb-ft/410 Nm Auto

Application intended for: E46 330i 330ci, E46 330i ZHP, E60 530i M54, E85 Z4 3.0i M54, E39 530i from 2000 2001 2002 2003 2004 200

Fitting includes:

  • Pre-work dyno power run & health check
  • Professional installation from approved ESS tuners in the UK
  • Thorough roadtesting pre-delivery
  • ESS Software & further dyno time with printouts provided

Due to varying changes in USD to GBP please contact us for latest Pricing

[contact-form-7 404 "Not Found"]

Additional information

Weight 40 kg



3 SERIES, 5 Series, Z4


E39, E46, E85, E86


330I, 530I



has been added to your cart: